Optix 400M 3D Scanner

Optix 400M head is upgraded based on model 300 and is widely used in many different industries. It provides a high accuracy and is suitable for middle range scanning. It is good for both large and medium size part scanning. It serves as a middle solution between Optix 400S and 400L heads. Scanning time is operator controlled and is as low as 1 sec. 

Optix 400M head may be used to image targets ranging from 150mm (6″) to 500mm (20″) in size. Additionally, larger targets may be imaged by combining multiple scans which are easily accomplished using our software. In certain models we can also increase the sensor dimensions to 2 mega pixels. Scanning with higher resolution or longer range can be accomplished with a snap with out operator calibration.

 

 

 

 

Resolution

  • 170 microns* @ 300mm
  • 375 microns @ 650mm
  • 0.007″ @ 12″
  • 0.015″ @ 26″
3d-scanner-resolution

Deviation From Ideal Scanning Plane

  • ±0.0014″ @ 12″
  • ±0.004″ @ 26″
  • ±35 microns @ 300mm
  • ±100 microns @ 650mm
3d-scanner-distance

Depth of Field

  • 300-650mm
  • (12″-26″)
3d-scanner-depth-of-field

Point Density

  • Up To 1.3 Millions Points Per Scan
3d-scanner-point-density

Parallax Base Distance

  • 200mm
  • (7.87″)
3d-scanner-parallax-base

Field of View

  • 30 Degrees
3d-scanner-field-of-view

Dimensions of Scanner

  • 254x172x95mm
  • (10″x6.77″x3.73″)
3d-scanner-demensions

Lens

  • 8mm Low Distortion Lens

Primary Application

  • Medium Range scanning. Large and medium size objects

Optix 400M Applications/Markets

  • Sheet metal
  • Inspection
  • Reverse Engineering
  • Tool & Die
  • Design
  • Machining
  • Medical
  • Aerospace
  • Multimedia
  • Animation
Be Sociable, Share!